Neurovascular

Filter by Aneurysm Location

Filter by Aneurysm Size

Filter by Category

AN 001

AN 001

This silicone model is a right internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 001
AN 002

AN 002

This silicone model is a posterior vessel with a basilar aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 002
AN 003

AN 003

This silicone model is a right internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 003
AN 004

AN 004

This silicone model is a left internal carotid with a pcomm aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 004
AN 005

AN 005

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 005
AN 007

AN 007

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 007
AN 008

AN 008

This silicone model is a right internal carotid with an ophtalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 008
AN 011

AN 011

This silicone model is a right internal carotid with an ophtalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 011
AN 012

AN 012

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN 012
AN013

AN013

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN013
AN015

AN015

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN015
AN016

AN016

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN016
AN017

AN017

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration
Read More About AN017
AN020

AN020

This silicone model is a posterior vessel with a basilar aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN020
AN024

AN024

This silicone model is a left internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN024
AN025

AN025

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN025
AN026

AN026

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN026
AN027

AN027

This silicone model is a left internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN027
AN028

AN028

This silicone model is a left internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN028
AN029

AN029

This silicone model is a posterior vessel with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN029
AN032

AN032

This silicone model is a left internal carotid with a PCom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN032
AN034

AN034

This silicone model is a right internal carotid with a PCom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN034
AN035

AN035

This silicone model is a posterior vessel with a SCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN035
AN036

AN036

This silicone model is a left internal carotid with a SCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN036
AN037

AN037

This silicone model is a left internal carotid with a paraophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN037
AN038

AN038

This silicone model is a right internal carotid with a paraophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN038
AN039

AN039

This silicone model is a right internal carotid with a paraophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN039
AN040

AN040

This silicone model is a left internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN040
AN041

AN041

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN041
AN042

AN042

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN042
AN043

AN043

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN043
AN044

AN044

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN044
AN045

AN045

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN045
AN046

AN046

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN046
AN047

AN047

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN047
AN048

AN048

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN048
AN049

AN049

This silicone model is a right internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN049
AN050

AN050

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN050
AN051

AN051

This silicone model is a left internal carotid with a paraclinoid aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN051
AN052

AN052

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN052
AN053

AN053

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN053
AN054

AN054

This silicone model is a left internal carotid with a paraophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN054
AN055

AN055

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN055
AN056

AN056

This silicone model is posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN056
AN057

AN057

This silicone model is posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN057
AN059

AN059

This silicone model is a left carotid with multiple aneurysms. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration.
Read More About AN059
AN060

AN060

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN060
AN061

AN061

This silicone model is a right internal carotid with an PCOM aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN061
AN062

AN062

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN062
AN063

AN063

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN063
AN064

AN064

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN064
AN065

AN065

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN065
AN066

AN066

This silicone model is a left internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN066
AN067

AN067

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN067
AN068

AN068

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN068
AN069

AN069

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN069
AN070

AN070

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN070
AN071

AN071

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN071
AN072

AN072

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN072
AN073

AN073

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN073
AN074

AN074

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN074
AN075

AN075

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN075
AN076

AN076

This silicone model is a posterior vessel with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN076
AN077

AN077

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN077
AN078

AN078

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN078
AN079

AN079

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN079
AN080

AN080

This silicone model is a posterior vessel with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN080
AN081

AN081

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN081
AN082

AN082

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN082
AN083

AN083

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN083
AN084

AN084

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN084
AN085

AN085

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN085
AN088

AN088

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN088
AN089

AN089

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN089
AN090

AN090

This silicone model is a right internal carotid with an MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN090
AN091

AN091

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN091
AN092

AN092

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN092
AN093

AN093

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN093
AN094

AN094

This silicone model is a posterior vessel with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN094
AN095

AN095

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN095
AN098

AN098

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN098
AN099

AN099

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN099
AN100

AN100

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN100
AN101

AN101

This silicone model is a posterior vessel with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN101
AN102

AN102

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN102
AN103

AN103

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN103
AN104

AN104

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN104
AN105

AN105

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN105
AN106

AN106

This silicone model is a left internal carotid with a PCom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN106
AN107

AN107

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN107
AN108

AN108

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN108
AN110

AN110

This silicone model is a right internal carotid with multiple aneurysm. The vessel was created for testing, training and demonstration.
Read More About AN110
AN111

AN111

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN111
AN112

AN112

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN112
AN113

AN113

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN113
AN114

AN114

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN114
AN115

AN115

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN115
AN116

AN116

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN116
AN117

AN117

This silicone model is a left internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration
Read More About AN117
AN118

AN118

This silicone model is a right internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN118
AN119

AN119

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN119
AN120

AN120

This silicone model is a right internal carotid with a cavernous aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN120
AN121

AN121

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN121
AN122

AN122

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN122
AN123

AN123

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN123
AN124

AN124

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN124
AN127

AN127

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN127
AN128

AN128

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN128
AN129

AN129

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN129
AN130

AN130

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN130
AN131

AN131

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN131
AN132

AN132

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN132
AN133

AN133

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN133
AN134

AN134

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN134
AN135

AN135

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN135
AN136

AN136

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN136
AN137

AN137

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration
Read More About AN137
AN138

AN138

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN138
AN139

AN139

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN139
AN140

AN140

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN140
AN141

AN141

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN141
AN142

AN142

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN142
AN148

AN148

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN148
AN149

AN149

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN149
AN150

AN150

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN150
AN151

AN151

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN151
AN152

AN152

This silicone model is a left internal carotid with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN152
AN156

AN156

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN156
AN157

AN157

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN157
AN159

AN159

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN159
AN165

AN165

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN165
AN166

AN166

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN166
AN168

AN168

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN168
AN169

AN169

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN169
AN170

AN170

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN170
AN171

AN171

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN171
AN172

AN172

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN172
AN173

AN173

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN173
AN174

AN174

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN174
AN175

AN175

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN175
AN176

AN176

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN176
AN177

AN177

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN177
AN178

AN178

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN178
AN180

AN180

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN180
AN181

AN181

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN181
AN182

AN182

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN182
AN183

AN183

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN183
AN184

AN184

This silicone model is a right internal carotid with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN184
AN186

AN186

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN186
AN187

AN187

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN187
AN188

AN188

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN188
AN189

AN189

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN189
AN190

AN190

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN190
AN191

AN191

This silicone model is a right internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN191
AN192

AN192

This silicone model is a posterior vessel with a basilar fusiform. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN192
AN193

AN193

This silicone model is a right internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN193
AN194

AN194

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN194
AN195

AN195

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN195
AN196

AN196

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN196
AN197

AN197

This silicone model is a right internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN197
AN198

AN198

This silicone model is a left internal carotid with a ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN198
AN200

AN200

This silicone model is a right internal carotid with an MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN200
AN201

AN201

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN201
AN202

AN202

This silicone model is a left internal carotid with an ICA terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN202
AN203

AN203

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN203
AN204

AN204

This silicone model is a left carotid with an MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN204
AN205

AN205

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN205
AN206

AN206

This silicone model is a left internal carotid with an ACom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN206
AN207

AN207

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN207
AN208

AN208

This silicone model is a left internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN208
AN209

AN209

This silicone model is a left internal carotid with an opthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN209
AN210

AN210

This silicone model is a left internal carotid with an opthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN210
AN211

AN211

This silicone model is a right internal carotid with multiple aneurysms. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN211
AN213

AN213

This silicone model is a right internal carotid with a Pcom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN213
AN214

AN214

This silicone model is a right internal carotid with a Pcom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN214
AN215

AN215

This silicone model is a posterior vessel with a basilar aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN215
AN216

AN216

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN216
AN217

AN217

This silicone model is a left internal carotid with a PCom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN217
AN218

AN218

This silicone model is a left internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN218
AN220

AN220

This silicone model is a left internal carotid with a paraclinoid aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN220
AN221

AN221

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN221
AN222

AN222

This silicone model is a left internal carotid with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About AN222
AN223

AN223

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN223
AN224

AN224

This silicone model is a right internal carotid with a MCA aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN224
AN225

AN225

This silicone model is a right internal carotid with an ophthalmic aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training, and demonstration
Read More About AN225
AN226

AN226

This silicone model is a left internal carotid with a PCom aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN226
AN227

AN227

This silicone model is a posterior vessel with a basilar terminus aneurysm. This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AN227
ASIST001

ASIST001

This silicone model is an acute ischemic stroke. The vessel was created for testing, training and demonstration.
Read More About ASIST001
ASIST002

ASIST002

This silicone model is a cerebral stroke. The vessel was created for testing, training and demonstration.
Read More About ASIST002
ASIST003

ASIST003

This silicone model is a cerebral stroke. The vessel was created for testing, training and demonstration.
Read More About ASIST003
ASIST004

ASIST004

This silicone model is a cerebral stroke. The vessel was created for testing, training and demonstration.
Read More About ASIST004
ASIST005

ASIST005

This silicone model is a cerebral stroke. The vessel was created for testing, training and demonstration.
Read More About ASIST005
AVM006

AVM006

This silicone model is an arteriovenous malformation (AVM). This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AVM006
AVM009

AVM009

This silicone model is an arteriovenous malformation (AVM). This geometry was taken directly from patient geometry. The vessel was created for testing, training and demonstration.
Read More About AVM009
COW001

COW001

This silicone model is a Circle of Willis with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW001
COW002

COW002

This silicone model is a Circle of Willis with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW002
COW003

COW003

This silicone model is a Circle of Willis with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW003
COW004

COW004

This silicone model is a Circle of Willis with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW004
COW005

COW005

This silicone model is a Circle of Willis without aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW005
COW006

COW006

This silicone model is a Circle of Willis without aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW006
COW007

COW007

This silicone model is a Circle of Willis with multiple aneurysms. The vessel was created for testing, training and demonstration.
Read More About COW007